400-832-9322

Welcome to the official website of Dongguan Xonje Electronic Technology Co., Ltd!

Service Hotline:

Professional SMT peripheral automation equipment R & D / production / sales

Focused on: PCB&FPC splitting, FPC pulse hot pressing welding; Fully automatic intelligent unmanned

dividing and welding production line

National Service Hotline：400-832-9322

Online rotary table V-slot dividing machine XJVC-10A
It can achieve automatic slitting in both V slot X and Y directions, and clean and burr free slitting of aluminum substrate, copper substrate, FR4, and fiberglass board. The slitting machine can connect to the assembly line to achieve fully automatic slitting without the need for manual plate placement; The cut boards are transported by the assembly line, which greatly saves manpower and fully realizes unmanned board splitting operations. When changing products, directly exchanging the blade mold and suction cup parts eliminates the need for manual adjustment of the blade, greatly saving time.
  • Product Details
Features of the online rotary table V-slot dividing machine XJVC-10A:
1. A machine is equipped with a lower cutting die module, and the PCB board is sent out to the predetermined track through the upper board mechanism;
Move the robotic arm over and use a vacuum nozzle to transport the PCB board onto the cutting machine's cutting die.
2. After placing the PCB on the lower knife mold module; Move to the cutting position, and the circular knife on the machine will translate and cut the PCB board. After the translation and cutting are completed,
Move the knife mold module below to the cutting position again; Until the horizontal plate is finely rotated, the hollow platform automatically rotates by 90 degrees to cut the vertical plate.
3. After the machine finishes cutting the PCB, the knife mold and knife group exit; The board picking robot moves over and sucks up the cut PCB board and the waste edge of the board at the same time,
Move to the waste box and place the waste, then translate it to the material tray on the receiving mechanism and place the product on the transportation line.
4. There is an industrial vacuum cleaner under the machine cutting blade mold to remove PCB dust.
Work in this cycle.
Note: The cut small PCB boards can be automatically placed in the material box (tray, or directly placed on the assembly line) according to customer requirements and transported by the assembly line.
Technical parameters of online rotary table V-slot dividing machine XJVC-10A:
1. This device is suitable for the PCB board splitting work after the plug-in.
2. Equipped with functions such as automatic feeding, automatic cutting, and automatic plate collection, the machine operation is simple and fast.
3. The setting of various parameters fully ensures the continuity of board feeding and splitting.
4. The main transmission components adopt precision stepper motors and SMC pneumatic components, with high repeated positioning accuracy.
5. The entire machine adopts PLC+touch screen control, with a simple and convenient operating interface.
6. Working voltage: 220V 50HZ 1800W
7. Efficiency: 15s/pcs (150 * 150mm eight blade cutting as reference)
8. The work area is protected by safety gratings
9. Overall dimensions: 1350 length * 1200 width * 1800mm height
10. Weight; 600KG
11. Working air pressure/pipe diameter: greater than 0.6MP/8MM
12. Minimum distance between parts and cutting line: greater than or equal to 1.5MM
13. Maximum and minimum board length: 300 * 250MM 12 * 12MM
14. Requirements for suction cups: At least one side of a single small board should have a space greater than 10MM * 10MM
15. Plate inlet adjustment: directly input parameters, automatic adjustment
16. Maximum height of PCB board components: The height limit for the reverse part of the PCB is 20MM, and the height limit for the front part is 35MM
17. Splitting blade: imported from Japan, high-speed steel blade angle: 10-30 degrees (optional), service life: 5 million times
18. Die accuracy: 0.1MM
19. Splitting speed: 0-800mm/s
20. Knife mold base movement mode: servo system+screw guide rail
21. Movement control method of suction cup robotic arm: stepper motor+guide rail+belt transmission
22. Vacuum suction method and efficiency: 1500W vacuum suction under the blade group
23. Panel thickness 0.6-3.5mm
24. Misoperation protection: Triple protection of grating sensors and software
25. Power off and gas off function: Yes
26. Self inspection function: startup time monitoring, production capacity monitoring, equipment fault information, and automatic troubleshooting system
Video of online rotary table V-slot divider XJVC-10A:




    Previous: Automatic width adjustment and dividing machine XJVC-5L-T
    Next: Online V-slot dual direction splitting machine XJVC-12A
    [ Print ][ Close ]