Characteristics of LED light strip dividing machine XJVC-2A:

1. This machine adopts a unique multi cutting method. The circuit board cutting is completed by six blades, with the upper and lower blades forming a group, forming a cutting unit.

2. They are Group A, Group B, Group C, and Group III. The entire cutting process is divided into three stages. Group A blades first cut 40% of the circuit board, and then B blades are rolled through the groove that A blades have cut, completing another 40% of the cutting amount. Finally, Group C blades cut the final 20% and polish it. Due to the small amount of cutting each time, the stress generated during the cutting process is reduced by more than 80% compared to the traditional one-time cutting method. The edges of the divided circuit board are flat and smooth, and the board surface is very flat, Do not twist or tilt. It is currently the only walking board type machine on the market that can ensure that the aluminum plate does not deform after cutting.

3. Due to multiple cuts, the cutting process is very smooth, greatly improving the positioning ability of the V-CUT slot. Even for circuit boards with shallow V-CUT slots, the V-CUT slot will not jump out of the guide knife, avoiding defects. 

4. Due to the small cutting force of the blade and the use of imported high-speed steel materials, the durability of the blade is greatly improved, and the blade life can reach over one year when dividing the aluminum substrate.

5. Simple operation and fast speed.

6. The upper and lower circular knives can be precisely adjusted.

7. The round knife can be repeatedly ground and reused, and the shape of the cutting knife can be customized.

Technical parameters of LED light strip dividing machine XJVC-2A:

LED strip splitter XJVC-2A video: